News HashiCorp to join IBM to accelerate multi-cloud automation. Read the blog →
Vault
Vault Home

You are viewing documentation for version v1.11.x. View latest version.

KV secrets engine - version 2

The kv secrets engine is used to store arbitrary secrets within the configured physical storage for Vault.

Key names must always be strings. If you write non-string values directly via the CLI, they will be converted into strings. However, you can preserve non-string values by writing the key/value pairs to Vault from a JSON file or using the HTTP API.

This secrets engine honors the distinction between the create and update capabilities inside ACL policies. The patch capability is also supported which is used to represent partial updates whereas the update capability represents full overwrites.

Setup

Most secrets engines must be configured in advance before they can perform their functions. These steps are usually completed by an operator or configuration management tool.

A v2 kv secrets engine can be enabled by:

$ vault secrets enable -version=2 kv

Or, you can pass kv-v2 as the secrets engine type:

$ vault secrets enable kv-v2

Additionally, when running a dev-mode server, the v2 kv secrets engine is enabled by default at the path secret/ (for non-dev servers, it is currently v1). It can be disabled, moved, or enabled multiple times at different paths. Each instance of the KV secrets engine is isolated and unique.

Upgrading from version 1

An existing version 1 kv store can be upgraded to a version 2 kv store via the CLI or API, as shown below. This will start an upgrade process to upgrade the existing key/value data to a versioned format. The mount will be inaccessible during this process. This process could take a long time, so plan accordingly.

Once upgraded to version 2, the former paths at which the data was accessible will no longer suffice. You will need to adjust user policies to add access to the version 2 paths as detailed in the ACL Rules section below. Similarly, users/applications will need to update the paths at which they interact with the kv data once it has been upgraded to version 2.

An existing version 1 kv can be upgraded to a version 2 KV store with the CLI command:

$ vault kv enable-versioning secret/Success! Tuned the secrets engine at: secret/

or via the API:

$ cat payload.json{  "options": {      "version": "2"  }} $ curl \    --header "X-Vault-Token: ..." \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/sys/mounts/secret/tune

ACL rules

The version 2 kv store uses a prefixed API, which is different from the version 1 API. Before upgrading from a version 1 kv the ACL rules should be changed. Also different paths in the version 2 API can be ACL'ed differently.

Writing and reading versions are prefixed with the data/ path. This policy that worked for the version 1 kv:

path "secret/dev/team-1/*" {  capabilities = ["create", "update", "read"]}

Should be changed to:

path "secret/data/dev/team-1/*" {  capabilities = ["create", "update", "read"]}

There are different levels of data deletion for this backend. To grant a policy the permissions to delete the latest version of a key:

path "secret/data/dev/team-1/*" {  capabilities = ["delete"]}

To allow the policy to delete any version of a key:

path "secret/delete/dev/team-1/*" {  capabilities = ["update"]}

To allow a policy to undelete data:

path "secret/undelete/dev/team-1/*" {  capabilities = ["update"]}

To allow a policy to destroy versions:

path "secret/destroy/dev/team-1/*" {  capabilities = ["update"]}

To allow a policy to list keys:

path "secret/metadata/dev/team-1/*" {  capabilities = ["list"]}

To allow a policy to view metadata for each version:

path "secret/metadata/dev/team-1/*" {  capabilities = ["read"]}

To allow a policy to permanently remove all versions and metadata for a key:

path "secret/metadata/dev/team-1/*" {  capabilities = ["delete"]}

The allowed_parameters, denied_parameters, and required_parameters fields are not supported for policies used with the version 2 kv store. See the Policies Concepts for a description of these parameters.

See the API Specification for more information.

Usage

After the secrets engine is configured and a user/machine has a Vault token with the proper permission, it can generate credentials. The kv secrets engine allows for writing keys with arbitrary values.

The path-like KV-v1 syntax for referencing a secret (secret/foo) can still be used in KV-v2, but we recommend using the -mount=secret flag syntax to avoid mistaking it for the actual path to the secret (secret/data/foo is the real path).

Writing/Reading arbitrary data

  1. Write arbitrary data:

    $ vault kv put -mount=secret my-secret foo=a bar=bKey              Value---              -----created_time     2019-06-19T17:20:22.985303Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          1

  2. Read arbitrary data:

    $ vault kv get -mount=secret my-secret====== Metadata ======Key              Value---              -----created_time     2019-06-19T17:20:22.985303Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          1 ====== Data ======Key         Value---         -----foo         abar         b

  3. Write another version, the previous version will still be accessible. The -cas flag can optionally be passed to perform a check-and-set operation. If not set the write will be allowed. If set to -cas=0 a write will only be allowed if the key doesn't exist. If the index is non-zero the write will only be allowed if the key’s current version matches the version specified in the cas parameter.

    $ vault kv put -mount=secret -cas=1 my-secret foo=aa bar=bbKey              Value---              -----created_time     2019-06-19T17:22:23.369372Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          2

  4. Reading now will return the newest version of the data:

    $ vault kv get -mount=secret my-secret====== Metadata ======Key              Value---              -----created_time     2019-06-19T17:22:23.369372Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          2 ====== Data ======Key         Value---         -----foo         aabar         bb

  5. Partial updates can be accomplished using the vault kv patch command. A command will initially attempt an HTTP PATCH request which requires the patch ACL capability. The PATCH request will fail if the token used is associated with a policy that does not contain the patch capability. In this case the command will perform a read, local update, and subsequent write which require both the read and update ACL capabilities.

    The -cas flag can optionally be passed to perform a check-and-set operation. It will only be used in the case of the initial PATCH request. The read-then-write flow will use the version value from the secret returned by the read to perform a check-and-set operation in the subsequent write.

    $ vault kv patch -mount=secret -cas=2 my-secret bar=bbbKey              Value---              -----created_time     2019-06-19T17:23:49.199802Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          3

  6. The vault kv patch command also supports a -method flag which can be used to specify HTTP PATCH or read-then-write. The supported values are patch and rw for HTTP PATCH and read-then-write, respectively.

    Perform a patch using the patch method:

    $ vault kv patch -mount=secret -method=patch -cas=2 my-secret bar=bbbKey              Value---              -----created_time     2019-06-19T17:23:49.199802Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          3

    Perform a patch using the read-then-write method:

    $ vault kv patch -mount=secret -method=rw my-secret bar=bbbKey              Value---              -----created_time     2019-06-19T17:23:49.199802Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          3

  7. Reading after a patch will return the newest version of the data in which only the specified fields were updated:

    $ vault kv get -mount=secret my-secret====== Metadata ======Key              Value---              -----created_time     2019-06-19T17:23:49.199802Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          3 ====== Data ======Key         Value---         -----foo         aabar         bbb

  8. Previous versions can be accessed with the -version flag:

    $ vault kv get -mount=secret -version=1 my-secret====== Metadata ======Key              Value---              -----created_time     2019-06-19T17:20:22.985303Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          1 ====== Data ======Key         Value---         -----foo         abar         b

Deleting and destroying data

When deleting data the standard vault kv delete command will perform a soft delete. It will mark the version as deleted and populate a deletion_time timestamp. Soft deletes do not remove the underlying version data from storage, which allows the version to be undeleted. The vault kv undelete command handles undeleting versions.

A version's data is permanently deleted only when the key has more versions than are allowed by the max-versions setting, or when using vault kv destroy. When the destroy command is used the underlying version data will be removed and the key metadata will be marked as destroyed. If a version is cleaned up by going over max-versions the version metadata will also be removed from the key.

See the commands below for more information:

  1. The latest version of a key can be deleted with the delete command, this also takes a -versions flag to delete prior versions:

    $ vault kv delete -mount=secret my-secretSuccess! Data deleted (if it existed) at: secret/data/my-secret

  2. Versions can be undeleted:

    $ vault kv undelete -mount=secret -versions=2 my-secretSuccess! Data written to: secret/undelete/my-secret $ vault kv get -mount=secret my-secret====== Metadata ======Key              Value---              -----created_time     2019-06-19T17:23:21.834403Zcustom_metadata  <nil>deletion_time    n/adestroyed        falseversion          2 ====== Data ======Key         Value---         -----my-value    short-lived-s3cr3t

  3. Destroying a version permanently deletes the underlying data:

    $ vault kv destroy -mount=secret -versions=2 my-secretSuccess! Data written to: secret/destroy/my-secret

Key metadata

All versions and key metadata can be tracked with the metadata command & API. Deleting the metadata key will cause all metadata and versions for that key to be permanently removed.

See the commands below for more information:

  1. All metadata and versions for a key can be viewed:

    $ vault kv metadata get -mount=secret my-secret========== Metadata ==========Key                     Value---                     -----cas_required            falsecreated_time            2019-06-19T17:20:22.985303Zcurrent_version         2custom_metadata         <nil>delete_version_after    0smax_versions            0oldest_version          0updated_time            2019-06-19T17:22:23.369372Z ====== Version 1 ======Key              Value---              -----created_time     2019-06-19T17:20:22.985303Zdeletion_time    n/adestroyed        false ====== Version 2 ======Key              Value---              -----created_time     2019-06-19T17:22:23.369372Zdeletion_time    n/adestroyed        true

  2. The metadata settings for a key can be configured:

    $ vault kv metadata put -mount=secret -max-versions 2 -delete-version-after="3h25m19s" my-secretSuccess! Data written to: secret/metadata/my-secret

    Delete-version-after settings will apply only to new versions. Max versions changes will be applied on next write:

    $ vault kv put -mount=secret my-secret my-value=newer-s3cr3tKey              Value---              -----created_time     2019-06-19T17:31:16.662563Zcustom_metadata  <nil>deletion_time    2019-06-19T20:56:35.662563Zdestroyed        falseversion          4

    Once a key has more versions than max versions the oldest versions are cleaned up:

    $ vault kv metadata get -mount=secret my-secret========== Metadata ==========Key                     Value---                     -----cas_required            falsecreated_time            2019-06-19T17:20:22.985303Zcurrent_version         4custom_metadata         <nil>delete_version_after    3h25m19smax_versions            2oldest_version          3updated_time            2019-06-19T17:31:16.662563Z ====== Version 3 ======Key              Value---              -----created_time     2019-06-19T17:23:21.834403Zdeletion_time    n/adestroyed        true ====== Version 4 ======Key              Value---              -----created_time     2019-06-19T17:31:16.662563Zdeletion_time    2019-06-19T20:56:35.662563Zdestroyed        false

    A secret's key metadata can contain custom metadata used to describe the secret. The data will be stored as string-to-string key-value pairs. The -custom-metadata flag can be repeated to add multiple key-value pairs.

    The vault kv metadata put command can be used to fully overwrite the value of custom_metadata:

    $ vault kv metadata put -mount=secret -custom-metadata=foo=abc -custom-metadata=bar=123 my-secretSuccess! Data written to: secret/metadata/my-secret $ vault kv get -mount=secret my-secret====== Metadata ======Key              Value---              -----created_time     2019-06-19T17:22:23.369372Zcustom_metadata  map[bar:123 foo:abc]deletion_time    n/adestroyed        falseversion          2 ====== Data ======Key         Value---         -----foo         aabar         bb

    The vault kv metadata patch command can be used to partially overwrite the value of custom_metadata. The following invocation will update custom_metadata sub-field foo but leave bar untouched:

    $ vault kv metadata patch -mount=secret -custom-metadata=foo=def my-secretSuccess! Data written to: secret/metadata/my-secret $ vault kv get -mount=secret my-secret====== Metadata ======Key              Value---              -----created_time     2019-06-19T17:22:23.369372Zcustom_metadata  map[bar:123 foo:def]deletion_time    n/adestroyed        falseversion          2 ====== Data ======Key         Value---         -----foo         aabar         bb

  3. Permanently delete all metadata and versions for a key:

    $ vault kv metadata delete -mount=secret my-secretSuccess! Data deleted (if it existed) at: secret/metadata/my-secret

Tutorial

Refer to the Versioned Key/Value Secrets Engine tutorial to learn how to use KV secrets engine v2 to version or roll back secrets.

API

The KV secrets engine has a full HTTP API. Please see the KV secrets engine API for more details.