Sentinel CLI Configuration File Syntax

The Sentinel CLI's configuration file can be used to control the behavior of the simulator during apply and test operations.

Usage

The configuration file is used in different ways depending on what operation you are trying to execute.

Apply

When using sentinel apply, configuration files that have the .hcl extension are loaded into a single configuration. This allows for configuration to be split across multiple files, which is useful for large policy sets. To supply a single configuration file, the -config=FILE flag can be used, where FILE is the path to the configuration file. This argument also allows for a .json configuration file to be supplied. The default is sentinel.[hcl|json].

See the apply command reference for more details.

Test

When using sentinel test, each file matching test/<policy>/*.[hcl|json] is a configuration file representing a single test case, where <policy> is the name of the policy being tested. Configure assertions for each test case using the test section.

See the test command reference for more details.

Remote sources

When declaring a policy or module block within the configuration, a source attribute must be supplied. This source should declare the location of the resource, which can be either a local file or a URL pointing to a remote file. Examples of local source attributes are detailed both in the Policies and Modules sections of this page. Below are a few examples of remote source attributes.

Example:

policy "foo" {  source = "git::https://github.com/hashicorp/sentinel-example.git//main.sentinel"  enforcement_level = "hard-mandatory"}

The above example will fetch the policy from the provided URL and place it into the cache ready for use. Be sure to read the Remote Sources page for an in-depth overview.

Configuration File Reference

The format of the configuration file is either JSON or HCL. The available blocks are:

• mock - A mock import specification.
• policy - Configuration for a policy.
• import - Configuration for a module, standard import, plugin or static import.
• global - Data that is inserted into the global scope.
• param - Values for parameters defined in the policy.
• test - Test cases for the test command.
• sentinel - Configuration to manage the Sentinel runtime

Mock Imports

Mock imports allow running a policy with an import that you may not have access to or is too difficult to run. For example, it can be easier to mock data for Terraform Enterprise locally instead of having to run a workspace through a plan/policy check cycle.

Mock imports are specified using the mock block, labelled by the import name that you want to mock. For example, if you wanted to mock the time import, you could create an entry with the time label pointing to the data you want to mock.

The data can take one of two forms:

Mocking static data

Static data can be mocked directly via HCl using the data attribute on the mock block.

Example:

mock "time" {  data = {    now = {      hour = 9      minute = 42    }  }}

With the above configuration, the following policy would pass:

Press "Run" to get policy output

Mocking with Sentinel code

There are some Sentinel types that raw data cannot mock, such as functions, and maps that don't have string keys. To mock this data, you can use a Sentinel file itself. In this case, you can set the module attribute to a file with the Sentinel code in it, relative to the current working directory in the event of apply, or relative to the configuration file location in the event of test.

Note that main is not required in a mock data file.

Example:

mock "foo" {  module {    source = "mock-foo.sentinel"  }}

mock-foo.sentinel would contain:

bar = func() {    return "baz"}

With the above configuration, the following policy would pass:

Press "Run" to get policy output

Policies

The policy block allows for the the configuration of policies to assist with integrating into other commands.

Each policy block has a label to identify the policy, with the block providing configuration of the policy. The available configuration options for policy are source, enforcement_level and an optional params attribute. The source key provides the location of the policy, while enforcement_level is currently used by integrations such as HCP Terraform. For more information on the source value, see Policy and Module Sources.

The optional params attribute is used to provide values to parameters defined within the policy file.

policy "foo" {  source = "foo.sentinel"  enforcement_level = "hard-mandatory"  params = {    "name" = "Sample"  }}

If enforcement_level is not supplied, it will fallback to the advisory level.

Imports

Import configuration allows you to configure modules, standard imports and import plugins.

The import is a multi-label block, with the first label determining the kind of import being configured. Currently the supported values for this label are:

• "module" for configuring import modules
• "plugin" for configuring standard imports and import plugins
• "static" for configuring static data files as imports

Import Modules

The import "module" block allows you to map a Sentinel import to a module. The Sentinel CLI will parse the module source and make it available for evaluation with the policy.

Each block has a label aligning to the name of the import, with the block set to the configuration object for the module. Currently, the only value within the configuration object is source, which points to the location of the module. For more information on the source value, see Policy and Module Sources.

import "module" "foo" {  source = "modules/foo.sentinel"} import "module" "bar" {  source = "modules/bar.sentinel"}

Note when using sentinel test, module paths must be specified relative to the location of the configuration file.

import "module" "foo" {  source = "../../modules/foo.sentinel"} import "module" "bar" {  source = "../../modules/bar/sentinel"}

See Writing and Using a Module for more details on using a module with this configuration.

Import Plugins

Import "plugin" configuration allows you to configure both standard imports as well as import plugins that can be used within a policy. If defining a custom import plugin, the Sentinel CLI will launch the plugin, connect to it, configure it, and execute it as needed by the policy.

The available configuration attributes for an import "plugin" are:

• source (string, required) - Path to the import plugin executable.
• args (list of string, optional) - A list of arguments to pass to the executable when starting it.
• env (map of string to string, optional) - A set of environmental variables to set when launching the plugin.
• config (map, optional) - Configuration for the plugin itself. This is specific to each individual plugin. Please reference the documentation for the plugin for more information.

Standard import example:

import "plugin" "time" {  config = { "timezone": "Australia/Brisbane" }}

With the above configuration, the following policy would pass:

Press "Run" to get policy output

Custom plugin example:

# flipper receives a boolean and returns the oppositeimport "plugin" "flipper" {  source = "/path/to/flipper"}

Press "Run" to get policy output

Static Imports

Static import configuration allows you to supply a data file and make it available to a policy via an import statement.

The available configuration attributes for an import "static" are:

• source (string, required) - Path to the static data file.
• format (string, required) - The format of the static data. Currently, only the "json" value is supported.

Static import example:

import "static" "people" {  source = "./data/people.json"  format = "json"}

Press "Run" to get policy output

Globals

Global data is injected directly into the global scope of the policy. This can be used to simulate global data that may be injected by a Sentinel-enabled application.

Global data is specified by the global key. The value is a map of variables to inject directly into the running policy.

Example:

global "time" {  value = {    now = {      day = 31    }  }}

With the above configuration, the following policy would pass. Notice that we don't have to do any import. The values of global are injected directly into the global scope.

Press "Run" to get policy output

Parameters

The param section allows you to supply values for the parameters found in a policy. Values entered here will satisfy required parameters in a policy, in addition to override any defaults. Note that any of the manual parameter value methods supported by sentinel apply will override the values set here.

param "foo" {  value = "bar"}

Test Cases

Test cases specify the test cases for the test command.

Tests are specified by the test key. The value of this is a map of string to boolean. The key is the name of a rule and the value is the expected value of that rule. If a rule is not specified, than any value is allowed.

Example:

test {  rules = {    main = true    days = []  }}

For the policy:

Press "Run" to get policy output

For more information, read about the test command.

Sentinel

The sentinel block provides configuration specific to the Sentinel runtime.

An example of how the sentinel block can be used to enable the terraform feature is as follows:

sentinel {  features = {    terraform = true  }}