Set up a Nomad cluster on AWS

30min
|
Nomad
Terraform
Packer

This tutorial will guide you through deploying a Nomad cluster with access control lists (ACLs) enabled on AWS. Consider checking out the cluster setup overview first as it covers the contents of the code repository used in this tutorial.

Prerequisites

For this tutorial, you need:

Packer 1.9.4 or later
Terraform 1.2.0 or later
Nomad 1.7.7 or later
An AWS account configured for use with Terraform

Note

This tutorial creates AWS resources that may not qualify as part of the AWS free tier. Be sure to follow the Cleanup process at the end of this tutorial so you don't incur any additional unnecessary charges.

Clone the code repository

The cluster setup code repository contains configuration files for creating a Nomad cluster on AWS. It uses Consul for the initial setup of the Nomad servers and clients and enables ACLs for both Consul and Nomad.

Clone the code repository.

$ git clone https://github.com/hashicorp/learn-nomad-cluster-setup

Navigate to the cloned repository folder.

$ cd learn-nomad-cluster-setup

Navigate to the aws folder.

$ cd aws

Create the Nomad cluster

There are two main steps to creating the cluster: building an Amazon Machine Image (AMI) with Packer and provisioning the cluster infrastructure with Terraform. Both Packer and Terraform require that some configurations be set before they run and these configuration variables are defined in the variables.hcl.example file.

Update the variables file for Packer

Rename variables.hcl.example to variables.hcl and open it in your text editor.

$ mv variables.hcl.example variables.hcl

Update the region variable with your preferred AWS region. In this example, the region is us-east-1. The remaining variables are for Terraform and you update them after building the AMI.

# Packer variables (all are required)region                    = "us-east-1"

Build the AMI

Note

Make sure that your AWS access credentials are set as environment variables as Packer uses them to build and register the AMI in AWS.

Initialize Packer to download the required plugins.

Tip

packer init returns no output when it finishes successfully.

$ packer init image.pkr.hcl

Then, build the image and provide the variables file with the -var-file flag.

Tip

Packer will print out a Warning: Undefined variable message notifying you that some variables were set in variables.hcl but not used, this is only a warning. The build will still complete sucessfully.

$ packer build -var-file=variables.hcl image.pkr.hcl # ... Build 'amazon-ebs' finished after 14 minutes 32 seconds. ==> Wait completed after 14 minutes 32 seconds ==> Builds finished. The artifacts of successful builds are:--> amazon-ebs: AMIs were created:us-east-1: ami-0445eeea5e1406960

Packer outputs the specific ami id once it finishes building the image. In this example, the value for the ami id would be ami-0445eeea5e1406960.

Update the variables file for Terraform

Open variables.hcl in your text editor and update the ami variable with the value output from the Packer build. In this example, the value is ami-0445eeea5e1406960.

# ... ami                          = "ami-0445eeea5e1406960" # These variables default to the values shown# and do not need to be updated unless you want to# change them# allowlist_ip               = "0.0.0.0/0"# name                       = "nomad"# server_instance_type       = "t2.micro"# server_count               = "3"# client_instance_type       = "t2.micro"# client_count               = "3"

The remaining variables in variables.hcl are optional.

allowlist_ip is a CIDR range specifying which IP addresses are allowed to access the Consul and Nomad UIs on ports 8500 and 4646 as well as SSH on port 22. The default value of 0.0.0.0/0 allows traffic from everywhere.
name is a prefix for naming the AWS resources.
server_instance_type and client_instance_type are the virtual machine instance types for the cluster server and client nodes, respectively.
server_count and client_count are the number of nodes to create for the servers and clients, respectively.

Deploy the Nomad cluster

Before you deploy the Nomad cluster, initialize the Terraform configuration to download the necessary providers and modules.

$ terraform initInitializing the backend...# ...Initializing provider plugins...# ...Terraform has been successfully initialized!# ...

Provision the resources and provide the variables file with the -var-file flag. Respond yes to the prompt to confirm the operation. The provisioning takes several minutes. Once complete, the Consul and Nomad web interfaces will become available.

$ terraform apply -var-file=variables.hcl # ... Plan: 18 to add, 0 to change, 0 to destroy. # ... Do you want to perform these actions?  Terraform will perform the actions described above.  Only 'yes' will be accepted to approve.   Enter a value: Yes # ... Apply complete! Resources: 18 added, 0 changed, 0 destroyed. Outputs: IP_Addresses = <<EOT Client public IPs: 52.91.50.99, 18.212.78.29, 3.93.189.88 Server public IPs: 107.21.138.240, 54.224.82.187, 3.87.112.200 The Consul UI can be accessed at http://107.21.138.240:8500/uiwith the token: dbd4d67b-4629-975c-e9a8-ff1a38ed1520 EOTconsul_token_secret = "dbd4d67b-4629-975c-e9a8-ff1a38ed1520"lb_address_consul_nomad = "http://107.21.138.240"

Verify the services are in a healthy state. Navigate to the Consul UI in your web browser with the URL in the Terraform output.

Consul UI Services page with login button

Click on the Log in button and use the bootstrap token secret consul_token_secret from the Terraform output to log in.

Consul UI with log in dialog

Click on the Nodes page from the sidebar navigation. There are six healthy nodes, including three Consul servers and three Consul clients created with Terraform.

Consul UI listing cluster nodes

Set up access to Nomad

Run the post-setup.sh script.

Note

It may take some time for the setup scripts to complete and for the Nomad user token to become available in the Consul KV store. If the post-setup.sh script doesn't work the first time, wait a couple of minutes and try again.

$ ./post-setup.shThe Nomad user token has been saved locally to nomad.token and deleted from the Consul KV store. Set the following environment variables to access your Nomad cluster with the user token created during setup: export NOMAD_ADDR=$(terraform output -raw lb_address_consul_nomad):4646export NOMAD_TOKEN=$(cat nomad.token)  The Nomad UI can be accessed at http://107.21.138.240:4646/uiwith the bootstrap token: 22444f72-c222-bd26-6c2c-584fb9e5b698

Apply the export commands from the output.

$ export NOMAD_ADDR=$(terraform output -raw lb_address_consul_nomad):4646 && \  export NOMAD_TOKEN=$(cat nomad.token)

Finally, verify connectivity to the cluster with nomad node status

$ nomad node statusID        Node Pool  DC   Name              Class   Drain  Eligibility  Status06320436  default    dc1  ip-172-31-18-200  <none>  false  eligible     ready6f5076b1  default    dc1  ip-172-31-16-246  <none>  false  eligible     ready5fc1e22c  default    dc1  ip-172-31-17-43   <none>  false  eligible     ready

Navigate to the Nomad UI in your web browser with the URL in the post-setup.sh script output. Click on Sign In in the top right corner and log in with the bootstrap token saved in the NOMAD_TOKEN environment variable. Set the Secret ID to the token's value and click Sign in with secret.

Nomad UI Access Control Tokens page

Click on the Clients page from the sidebar navigation to explore the UI.

Nomad Clients page

Cleanup

Destroy infrastructure

Use terraform destroy to remove the provisioned infrastructure. Respond yes to the prompt to confirm removal.

$ terraform destroy -var-file=variables.hcl # ... aws_instance.server[0]: Destruction complete after 30saws_instance.server[1]: Still destroying... [id=i-017defd36b45408c1, 30s elapsed]aws_instance.server[1]: Destruction complete after 30saws_iam_instance_profile.instance_profile: Destroying... [id=nomad20220613201917520400000002]aws_security_group.primary: Destroying... [id=sg-0ffdf8214d5fc85b2]aws_iam_instance_profile.instance_profile: Destruction complete after 0saws_iam_role.instance_role: Destroying... [id=nomad20220613201916761200000001]aws_iam_role.instance_role: Destruction complete after 0saws_security_group.primary: Destruction complete after 0saws_security_group.server_lb: Destroying... [id=sg-016a74cc79f3f2826]aws_security_group.server_lb: Destruction complete after 1s Destroy complete! Resources: 18 destroyed.

Delete AMI and S3-store snapshots

Your AWS account still has the AMI and its S3-stored snapshots, which you may be charged for depending on your other usage. Delete the AMI and snapshots stored in your S3 buckets.

Note

Remember to delete the AMI images and snapshots in the region where you created them. If you don’t update the region variable in the terraform.tfvars file, they are created in the us-east-1 region.

Delete the stored AMI built using packer using the deregister-image command.

$ aws ec2 deregister-image --image-id ami-0445eeea5e1406960

To delete stored snapshots, first query for the snapshot using the describe-snapshots command.

$ aws ec2 describe-snapshots \    --owner-ids self \    --query "Snapshots[*].{ID:SnapshotId,Time:StartTime}"

Next, delete the stored snapshot using the delete-snapshot command by specifying the snapshot-id value.

$ aws ec2 delete-snapshot --snapshot-id snap-1234567890abcdef0

Next steps

In this tutorial you created a Nomad cluster on AWS with Consul and ACLs enabled. From here, you may want to:

Run a job with a Nomad spec file or with Nomad Pack
Test out native service discovery in Nomad

For more information, check out the following resources.

Learn more about managing your Nomad cluster
Read more about the ACL stanza and using ACLs

Nomad on the cloud

Nomad on GCP