check Block

The check block instructs Nomad to register a check associated with a service into the Nomad or Consul service provider.

job "example" {  datacenters = ["dc1"]   group "cache" {    network {      port "db" { to = 6379 }    }     service {      provider = "nomad"      name     = "redis"      port     = "db"      check {        name     = "redis_probe"        type     = "tcp"        interval = "10s"        timeout  = "1s"      }    }     task "redis" {      driver = "docker"      config {        image = "redis:7"        ports = ["db"]      }    }  }}

check Parameters

• address_mode (string: "host") - Same as address_mode on service. Unlike services, checks do not have an auto address mode as there's no way for Nomad to know which is the best address to use for checks. Consul needs access to the address for any HTTP or TCP checks. See below for details. Unlike port, this setting is not inherited from the service. If the service address is set and the check address_mode is not set, the service address value will be used for the check address.

• args (array<string>: []) - Specifies additional arguments to the command. This only applies to script-based health checks.

• check_restart - See check_restart block.

• command (string: <varies>) - Specifies the command to run for performing the health check. The script must exit: 0 for passing, 1 for warning, or any other value for a failing health check. This is required for script-based health checks. Only supported in the Consul service provider.

  Caveat: The command must be the path to the command on disk, and no shell exists by default. That means operators like || or && are not available. Additionally, all arguments must be supplied via the args parameter. To achieve the behavior of shell operators, specify the command as a shell, like /bin/bash and then use args to run the check.

• grpc_service (string: <optional>) - What service, if any, to specify in the gRPC health check. gRPC health checks require Consul 1.0.5 or later.

• grpc_use_tls (bool: false) - Use TLS to perform a gRPC health check. May be used with tls_skip_verify to use TLS but skip certificate verification. May be used with tls_server_name to specify the ServerName to use for SNI and validation of the certificate presented by the server being checked.

• initial_status (string: <enum>) - Specifies the starting status of the service. Valid options are passing, warning, and critical. Omitting this field (or submitting an empty string) will result in the Consul default behavior, which is critical. Only supported in the Consul service provider. In the Nomad service provider, the initial status of a check is pending until Nomad produces an initial check status result.

• success_before_passing (int:0) - The number of consecutive successful checks required before Consul will transition the service status to passing. Only supported in the Consul service provider.

• failures_before_critical (int:0) - The number of consecutive failing checks required before Consul will transition the service status to critical. Only supported in the Consul service provider.

• interval (string: <required>) - Specifies the frequency of the health checks that Consul or Nomad service provider will perform. This is specified using a label suffix like "30s" or "1h". This must be greater than or equal to "1s".

• method (string: "GET") - Specifies the HTTP method to use for HTTP checks. Must be a valid HTTP method.

• body (string: "") - Specifies the HTTP body to use for HTTP checks.

• name (string: "service: <name> check") - Specifies the name of the health check. If the name is not specified Nomad generates one based on the service name.

• path (string: <varies>) - Specifies the path of the HTTP endpoint which will be queried to observe the health of a service. Nomad will automatically add the IP of the service and the port, so this is just the relative URL to the health check endpoint. This is required for HTTP-based health checks.

• expose (bool: false) - Specifies whether an Expose Path should be automatically generated for this check. Only compatible with Connect-enabled task-group services using the default Connect proxy. If set, check type must be http or grpc, and check name must be set. Only supported in the Consul service provider.

• port (string: <varies>) - Specifies the label of the port on which the check will be performed. Note this is the label of the port and not the port number unless address_mode = driver. The port label must match one defined in the network block. If a port value was declared on the service, this will inherit from that value if not supplied. If supplied, this value takes precedence over the service.port value. This is useful for services which operate on multiple ports. grpc, http, and tcp checks require a port while script checks do not. Checks will use the host IP and ports by default. In Nomad 0.7.1 or later numeric ports may be used if address_mode="driver" is set on the check.

• protocol (string: "http") - Specifies the protocol for the HTTP-based health checks. Valid options are http and https.

• task (string: "") - Specifies the task associated with this check. Scripts are executed within the task's environment, and check_restart blocks will apply to the specified task. Inherits the service.task value if not set. Must be unset or equivalent to service.task in task-level services.

• timeout (string: <required>) - Specifies how long to wait for a health check query to succeed. This is specified using a label suffix like "30s" or "1h". This must be greater than or equal to "1s"

  Caveat: Script checks use the task driver to execute in the task's environment. For task drivers with namespace isolation such as docker or exec, setting up the context for the script check may take an unexpectedly long amount of time (a full second or two), especially on busy hosts. The timeout configuration must allow for both this setup and the execution of the script. Operators should use long timeouts (5 or more seconds) for script checks, and monitor telemetry for client.allocrunner.taskrunner.tasklet_timeout.

• type (string: <required>) - This indicates the check types supported by Nomad. For Consul service checks, valid options are grpc, http, script, and tcp. For Nomad service checks, valid options are http and tcp.

• tls_server_name (string: "") - Indicates the ServerName to use for SNI and validation of the certificate presented by the server being checked, when performing TLS enabled checks (https and grpc with grpc_use_tls). If left unspecified, the ServerName will be inferred from the address of the server being checked unless the address is an IP address. There are two common cases where this is beneficial:

  • When the check address contains an IP, tls_server_name can be specified for SNI. Note: setting tls_server_name will also override the hostname used to verify the certificate presented by the server being checked.

  • When the check address contains a hostname which isn't be present in the SAN (Subject Alternative Name) field of the certificate presented by the server being checked. Note: setting tls_server_name will also override the hostname used for SNI.

  This field is only supported in the Consul service provider.

• tls_skip_verify (bool: false) - Skip verification of certificates for https and grpc with grpc_use_tls checks . Only supported in the Consul service provider.

• on_update (string: "require_healthy") - Specifies how checks should be evaluated when determining deployment health (including a job's initial deployment). This allows job submitters to define certain checks as readiness checks, progressing a deployment even if the Service's checks are not yet healthy. Checks inherit the Service's value by default. The check status is not altered in the service provider and is only used to determine the check's health during an update.

  • require_healthy - In order for Nomad to consider the check healthy during an update it must report as healthy.

  • ignore_warnings - If a Service Check reports as warning, Nomad will treat the check as healthy. The Check will still be in a warning state in Consul.

  • ignore - Any status will be treated as healthy.

  Caveat: on_update is only compatible with certain check_restart configurations. on_update = "ignore_warnings" requires that check_restart.ignore_warnings = true. check_restart can however specify ignore_warnings = true with on_update = "require_healthy". If on_update is set to ignore, check_restart must be omitted entirely.

header Block

HTTP checks may include a header block to set HTTP headers. The header block parameters have lists of strings as values. Multiple values will cause the header to be set multiple times, once for each value.

service {  # ...  check {    type     = "http"    port     = "lb"    path     = "/_healthz"    interval = "5s"    timeout  = "2s"    header {      Authorization = ["Basic ZWxhc3RpYzpjaGFuZ2VtZQ=="]    }  }}

HTTP Health Check

This example shows a service with an HTTP health check. This will query the service on the IP and port registered with Nomad at /_healthz every 5 seconds, giving the service a maximum of 2 seconds to return a response, and include an Authorization header. Any non-2xx code is considered a failure.

service {  check {    type     = "http"    port     = "lb"    path     = "/_healthz"    interval = "5s"    timeout  = "2s"    header {      Authorization = ["Basic ZWxhc3RpYzpjaGFuZ2VtZQ=="]    }  }}

Multiple Health Checks

This example shows a service with multiple health checks defined. All health checks must be passing in order for the service to register as healthy.

service {  check {    name     = "HTTP Check"    type     = "http"    port     = "lb"    path     = "/_healthz"    interval = "5s"    timeout  = "2s"  }   check {    name     = "HTTPS Check"    type     = "http"    protocol = "https"    port     = "lb"    path     = "/_healthz"    interval = "5s"    timeout  = "2s"    method   = "POST"  }   check {    name      = "Postgres Check"    type      = "script"    command   = "/usr/local/bin/pg-tools"    args      = ["verify", "database", "prod", "up"]    interval  = "5s"    timeout   = "2s"    on_update = "ignore_warnings"  }}

gRPC Health Check

gRPC health checks use the same host and port behavior as http and tcp checks, but gRPC checks also have an optional gRPC service to health check. Not all gRPC applications require a service to health check.

service {  check {    type            = "grpc"    port            = "rpc"    interval        = "5s"    timeout         = "2s"    grpc_service    = "example.Service"    grpc_use_tls    = true    tls_skip_verify = true  }}

In this example Consul would health check the example.Service service on the rpc port defined in the task's network resources block. See Using Driver Address Mode for details on address selection.

Script Checks with Shells

Note that script checks run inside the task. If your task is a Docker container, the script will run inside the Docker container. If your task is running in a chroot, it will run in the chroot. Please keep this in mind when authoring check scripts.

This example shows a service with a script check that is evaluated and interpolated in a shell; it tests whether a file is present at ${HEALTH_CHECK_FILE} environment variable:

service {  check {    type    = "script"    command = "/bin/bash"    args    = ["-c", "test -f ${HEALTH_CHECK_FILE}"]  }}

Using /bin/bash (or another shell) is required here to interpolate the ${HEALTH_CHECK_FILE} value.

The following examples of command fields will not work:

# invalid because command is not a pathcheck {  type    = "script"  command = "test -f /tmp/file.txt"} # invalid because path will not be interpolatedcheck {  type    = "script"  command = "/bin/test"  args    = ["-f", "${HEALTH_CHECK_FILE}"]}

Healthiness versus Readiness Checks

Multiple checks for a service can be composed to create healthiness and readiness checks by configuring on_update for the check.

service {  # This is a healthiness check that will be used to verify the service  # is responsive to tcp connections and behaving as expected.  check {    name     = "connection_tcp"    type     = "tcp"    port     = 6379    interval = "10s"    timeout  = "2s"  }   # This is a readiness check that is used to verify that, for example, the  # application has elected a leader by making a request to its /leader endpoint.  # Failures of this check are ignored during deployments.  check {    name      = "leader_elected"    type      = "http"    path      = "/leader"    interval  = "10s"    timeout   = "2s"    on_update = "ignore"  }}

For checks registered into the Nomad service provider, the status information will indicate Mode = readiness for readiness checks and Mode = healthiness for health checks.

Check status on CLI

For checks registered into the Nomad service provider, the status information of checks can be viewed per-allocation. The alloc status command now includes summary information for Nomad service checks.

$ nomad alloc status <allocation-id>

Nomad Service Checks:Service   Task     Name          Mode         Statusdatabase  task     db_tcp_probe  readiness    successweb       (group)  healthz       healthiness  failureweb       (group)  index-page    healthiness  success

The alloc checks command can be used for viewing complete check status information for all checks in an allocation.

$ nomad alloc checks <allocation-id>

Status of 3 Nomad Service ChecksID         =  d8651d93a50b9e28375a7beb9418c418Name       =  db_tcp_probeGroup      =  example.group[0]Task       =  taskService    =  databaseStatus     =  successMode       =  readinessTimestamp  =  2022-08-22T10:41:23-05:00Output     =  nomad: tcp okID          =  0413b61bda7014f02671675d7e146373Name        =  index-pageGroup       =  example.group[0]Task        =  (group)Service     =  webStatus      =  successStatusCode  =  200Mode        =  healthinessTimestamp   =  2022-08-22T10:41:23-05:00Output      =  nomad: http okID         =  c3cce3f0c97975f84bbf39bdd50deaeaName       =  healthzGroup      =  example.group[0]Task       =  (group)Service    =  webStatus     =  failureMode       =  healthinessTimestamp  =  2022-08-22T10:41:23-05:00Output     =  nomad: Get "http://:9999/": dial tcp :9999: connect: connection refused