News HashiCorp to join IBM to accelerate multi-cloud automation. Read the blog →
Consul
Consul Home

Custom Resource Definitions (CRDs) for Consul on Kubernetes

This topic describes how to manage Consul configuration entries with Kubernetes Custom Resources. Configuration entries provide cluster-wide defaults for the service mesh.

Supported Configuration Entries

You can specify the following values in the kind field. Click on a configuration entry to view its documentation:

Installation

Verify that the minimum version of the helm chart (0.28.0) is installed:

$ helm search repo hashicorp/consulNAME                CHART VERSION   APP VERSION DESCRIPTIONhashicorp/consul    0.28.0          1.9.1       Official HashiCorp Consul Chart

Update your helm repository cache if necessary:

$ helm repo updateHang tight while we grab the latest from your chart repositories......Successfully got an update from the "hashicorp" chart repositoryUpdate Complete. ⎈Happy Helming!⎈

Refer to Install with Helm Chart for further installation instructions.

Note: Configuration entries require connectInject to be enabled, which is a default behavior in the official Helm Chart. If you disabled this setting, you must re-enable it to use CRDs.

Upgrading An Existing Cluster to CRDs

If you have an existing Consul cluster running on Kubernetes you may need to perform extra steps to migrate to CRDs. Refer to Upgrade An Existing Cluster to CRDs for full instructions.

Usage

Once installed, you can use kubectl to create and manage Consul's configuration entries.

Create

You can create configuration entries with kubectl apply.

$ cat <<EOF | kubectl apply --filename -apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceDefaultsmetadata:  name: foospec:  protocol: "http"EOF servicedefaults.consul.hashicorp.com/foo created

Refer to Configuration Entries for detailed schema documentation.

Get

You can use kubectl get [kind] [name] to get the status of the configuration entry:

$ kubectl get servicedefaults fooNAME  SYNCEDfoo   True

The SYNCED status shows whether the configuration entry was successfully created in Consul.

Describe

You can use kubectl describe [kind] [name] to investigate the status of the configuration entry. If SYNCED is false, the status contains the reason why.

$ kubectl describe servicedefaults fooStatus:  Conditions:    Last Transition Time:  2020-10-09T21:15:50Z    Status:                True    Type:                  Synced

Edit

You can use kubectl edit [kind] [name] to edit the configuration entry:

$ kubectl edit servicedefaults foo# change protocol: http => protocol: tcpservicedefaults.consul.hashicorp.com/foo edited

You can then use kubectl get to ensure the change was synced to Consul:

$ kubectl get servicedefaults fooNAME  SYNCEDfoo   True

Delete

You can use kubectl delete [kind] [name] to delete the configuration entry:

$ kubectl delete servicedefaults fooservicedefaults.consul.hashicorp.com "foo" deleted

You can then use kubectl get to ensure the configuration entry was deleted:

$ kubectl get servicedefaults fooError from server (NotFound): servicedefaults.consul.hashicorp.com "foo" not found

Delete Hanging

If running kubectl delete hangs without exiting, there may be a dependent configuration entry registered with Consul that prevents the target configuration entry from being deleted. For example, if you set the protocol of your service to http in ServiceDefaults and then create a ServiceSplitter, you will not be able to delete ServiceDefaults.

This is because by deleting the ServiceDefaults config, you are setting the protocol back to the default which is tcp. Because ServiceSplitter requires that the service has an http protocol, Consul will not allow the ServiceDefaults to be deleted since that would put Consul into a broken state.

In order to delete the ServiceDefaults config, you would need to first delete the ServiceSplitter.

Kubernetes Namespaces

Consul CE

Consul Community Edition (Consul CE) ignores Kubernetes namespaces and registers all services into the same global Consul registry based on their names. For example, service web in Kubernetes namespace web-ns and service admin in Kubernetes namespace admin-ns are registered into Consul as web and admin with the Kubernetes source namespace ignored.

When creating custom resources to configure these services, the namespace of the custom resource is also ignored. For example, you can create a ServiceDefaults custom resource for service web in the Kubernetes namespace admin-ns even though the web service is actually running in the web-ns namespace (although this is not recommended):

apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceDefaultsmetadata:  name: web  namespace: admin-nsspec:  protocol: http---apiVersion: apps/v1kind: Deploymentmetadata:  name: web  namespace: web-nsspec: ...

Note: If you create two custom resources with identical kind and name values in different Kubernetes namespaces, the last one you create is not able to sync.

ServiceIntentions Special Case

ServiceIntentions are different from the other custom resources because the name of the resource doesn't matter. For other resources, the name of the resource determines which service it configures. For example, this resource configures the service web:

apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceDefaultsmetadata:  name: webspec:  protocol: http

For ServiceIntentions, because we need to support the ability to create wildcard intentions (e.g. foo => * (allow) meaning that foo can talk to any service), and because * is not a valid Kubernetes resource name, we instead use the field spec.destination.name to configure the destination service for the intention:

# foo => * (allow)apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceIntentionsmetadata:  name: name-does-not-matterspec:  destination:    name: '*'  sources:    - name: foo      action: allow---# foo => web (allow)apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceIntentionsmetadata:  name: name-does-not-matterspec:  destination:    name: web  sources:    - name: foo      action: allow

Note: If two ServiceIntentions resources set the same spec.destination.name, the last one created is not synced.

Consul Enterprise Enterprise

Consul Enterprise supports multiple configurations for how Kubernetes namespaces are mapped to Consul namespaces. The Consul namespace that the custom resource is registered into depends on the configuration being used but in general, you should create your custom resources in the same Kubernetes namespace as the service they configure.

The details on each configuration are:

  1. Mirroring - The Kubernetes namespace is mirrored into Consul. For example, the service web in Kubernetes namespace web-ns is registered as service web in the Consul namespace web-ns. In the same vein, a ServiceDefaults custom resource with name web in Kubernetes namespace web-ns configures that same service.

    This is configured with connectInject.consulNamespaces:

    global:  name: consul  enableConsulNamespaces: true  image: hashicorp/consul-enterprise:<tag>-entconnectInject:  consulNamespaces:    mirroringK8S: true

  2. Mirroring with prefix - The Kubernetes namespace is mirrored into Consul with a prefix added to the Consul namespace. For example, if the prefix is k8s- then service web in Kubernetes namespace web-ns will be registered as service web in the Consul namespace k8s-web-ns. In the same vein, a ServiceDefaults custom resource with name web in Kubernetes namespace web-ns configures that same service.

    This is configured with connectInject.consulNamespaces:

    global:  name: consul  enableConsulNamespaces: true  image: hashicorp/consul-enterprise:<tag>-entconnectInject:  consulNamespaces:    mirroringK8S: true    mirroringK8SPrefix: k8s-

  3. Single destination namespace - The Kubernetes namespace is ignored and all services are registered into the same Consul namespace. For example, if the destination Consul namespace is my-ns then service web in Kubernetes namespace web-ns is registered as service web in Consul namespace my-ns.

    In this configuration, the Kubernetes namespace of the custom resource is ignored. For example, a ServiceDefaults custom resource with the name web in Kubernetes namespace admin-ns configures the service with name web even though that service is running in Kubernetes namespace web-ns because the ServiceDefaults resource ends up registered into the same Consul namespace my-ns.

    This is configured with connectInject.consulNamespaces:

    global:  name: consul  enableConsulNamespaces: true  image: hashicorp/consul-enterprise:<tag>-entconnectInject:  consulNamespaces:    consulDestinationNamespace: 'my-ns'

    Note: In this configuration, if two custom resources are created in two Kubernetes namespaces with identical name and kind values, the last one created is not synced.

ServiceIntentions Special Case (Enterprise)

ServiceIntentions are different from the other custom resources because the name of the resource does not matter. For other resources, the name of the resource determines which service it configures. For example, this resource configures the service web:

apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceDefaultsmetadata:  name: webspec:  protocol: http

For ServiceIntentions, because we need to support the ability to create wildcard intentions (e.g. foo => * (allow) meaning that foo can talk to any service), and because * is not a valid Kubernetes resource name, we instead use the field spec.destination.name to configure the destination service for the intention:

# foo => * (allow)apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceIntentionsmetadata:  name: name-does-not-matterspec:  destination:    name: '*'  sources:    - name: foo      action: allow---# foo => web (allow)apiVersion: consul.hashicorp.com/v1alpha1kind: ServiceIntentionsmetadata:  name: name-does-not-matterspec:  destination:    name: web  sources:    - name: foo      action: allow

In addition, we support the field spec.destination.namespace to configure the destination service's Consul namespace. If spec.destination.namespace is empty, then the Consul namespace used is the same as the other config entries as outlined above.

Edit this page on GitHub